K2 InsertionRail 2.0 EndStop for Module Rows
Product details
The EndStop closes the end of a K2 InsertionRail 2.0 run. Without one the channel is open at the end of the row, so the last module has nothing to register against and nothing holding it from sliding out.
It also gives the installer something to set out from. Fit the stop first and the whole row can be pushed up to it, which is quicker and straighter than working outwards from the middle.
EndStop or FixStop
They are different parts and both appear on the same roof. The EndStop terminates the rail at the end of a row. The FixStop locates the rail on the mounting rail below and holds that position while the rest is built up. A typical run takes a stop at each end and fix stops along its length.
Order alongside
-
K2 InsertionRail 2.0 FixStop
The other stop. It locates the rail rather than terminating it, and most runs need both.
-
K2 InsertionRail 2.0 – 30; 5.70m
The rail itself, in the 30 mm frame size.
-
K2 InsertionRail 2.0 CrossConnector T Set
Holds the insertion rail onto the K2 mounting rail beneath.
-
K2 InsertionRail 2.0 RailConnector
Needed where the row is longer than a single rail.
Questions on the EndStop
Two, one at each end of the run. A roof with four rows of insertion rail takes eight.
It terminates the rail and locates the last module. The load path runs through the rail and its fixings, so follow K2's design output for those.
The EndStop closes the end of the run; the FixStop locates the rail along its length. Both are linked above.
It is the 2.0 part, so confirm the rail generation before ordering.
Build your complete solar system
Everything you need in one place.
- Inverters
- Batteries
- Mounting Systems
- Cabling & Accessories
Delivery times vary by region:
- UK — 1-2 business days
- Highlands & Islands — 1-2 business days
Returns accepted within 14 days of delivery for unused items in original packaging.